Bona R850 T 20 oz Adhesive Tube

Product ID: BONA-BR850T5600USBO

MFG: Bona
MFG Part Number: BR850T5600USBO

Available Stock: 139
Selected accessories will also be added to cart
$12.87 / EA
Quantity:
Bona R850T is a one component, moisture curing, water and solvent free, silane-based adhesive for wood floors. Provides outstanding adhesion to a variety of surfaces and allows for the natural movement of wood flooring.
KEY BENEFITS
• Perfect alternative to face nailing close-out rows, board replacements and trim applications
• Excellent initial “green grab” means the flooring stays in place
• Rapid shear strength development – flooring is ready for furniture and foot traffic in one day
• Easy to clean – will not harm the finish on pre-finished floors; will not stain hands
• Easy to apply – no memory means no need to tape or roll
• Exceptional ridge stability provides maximum adhesive transfer
• Zero VOC's
• GREENGUARD Indoor Air Quality Certified

TECH SPECS
Physical Characteristics:

Ingredients – Calcium carbonate, silane modified prepolymer, plasticizers, amorphous silica
Base – Silane Modified-Prepolymer
Color – Cream
Density – 12.5 lbs./gallon
VOC Content – Negligible
Sheer Strength – 335 psi (at final cure; lap sheer test, 1 mm gap)
Elongation – 250%
Odor – Non-offending
Flash Point – >100º C (212ºF) (Pensky-Martens)
Stability – 12 months from date of manufacture in unopened, original packaging

Application Characteristics:
Open Time- 40 minutes
Coverage – 60 L’ per tube with ¼” bead
Curing – Light foot traffic - 8-10 hours
Furniture, fixtures - 12-24 hours
Unfinished floor sanding - after 24 hours

HOW TO
Replaces top nailing on close-out rows and board replacements.

Supplemental fastening for wide plank boards when nailing and gluing are needed.

Ideal for projects where traditional fastening isn’t practical – hard to reach areas, radiant heat floors…

Commercial and residential. Use with solid or engineered prefinished and unfinished flooring; on, above or below grade* . May be used on both wood and concrete substrates** .

*Read and follow flooring manufacturer instructions, recommendations and limitations as to the
suitability of a particular flooring product to certain jobsite conditions and installation methods.

**After proper site conditions, moisture testing results and substrate preparation have been met.
See “Directions for Use” for acceptable jobsite conditions.