DuraSeal Wood Patch, White Oak, QT

DIRECTIONS:
SURFACE PREPARATION: Surface must be free of dust, oil, wax and moisture.

APPLICATION:
Apply with a putty knife or trowel.
Press patch into nail holes or minor imperfections keeping product slightly higher than the surface. Fill deep areas in layers while allowing ample time for each layer to dry.

CLEAN-UP:
Clean with water while Wood Patch is still damp.

STORAGE:
Keep containers tightly closed. Keep from freezing. If freezing occurs, thaw at room temperature for a minimum of 8 hours before using.

PHYSICAL PROPERTIES
* Density (lbs/gal): 14.1
* % Solids: 73
* Viscosity - CPS: 1,160,000
* pH: 8.4
* VOC (b/l): 0
* Flash Point: N/A